eKiosk GmbH > News > 6 Things You Should Know About the Corona Entrance Control
eKiosk GmbH > News > 6 Things You Should Know About the Corona Entrance Control

6 Things You Should Know About the Corona Entrance Control

Corona has completely turned the economic sector upside down. From one day to the next there were many restrictions. Nevertheless, we are now returning to normality, with the help of technical means. This means that shops and public buildings can reopen, albeit under certain restrictions. The Corona entrance control from eKiosk offers a possible solution to meet these restrictions. Learn more about the advantages of Corona entrance control now.

#1 Plug & Play

For our indoor solution you need nothing more than a socket connection. Our Corona entrance control is a plug & play installation and can be put into operation easily without support.

#2 Internet-of-Things

In our devices an IoT base station is built in, which is connected to the integrated PC via network cable. For the IoT base station, we have developed our own special software solution to display the counting pulses of the sensors in the form of a self-explanatory traffic light interface and thus control the flow of customers and visitors. At the same time, new sensors can be taught-in via an administration area and the entry traffic light can be configured for the individual entry and exit situation on site, e.g. number of permitted customers/visitors, counting direction of each sensor, etc.

Corona has completely turned the economic sector upside down. From one day to the next there were many restrictions. Nevertheless, we are now returning to normality, with the help of technical means. This means that shops and public buildings can reopen, albeit under certain restrictions. The Corona entrance control from eKiosk offers a possible solution to meet these restrictions. Learn more about the advantages of Corona entrance control now.

#1 Plug & Play

For our indoor solution you need nothing more than a socket connection. Our Corona entrance control is a plug & play installation and can be put into operation easily without support.

#2 Internet-of-Things

In our devices an IoT base station is built in, which is connected to the integrated PC via network cable. For the IoT base station, we have developed our own special software solution to display the counting pulses of the sensors in the form of a self-explanatory traffic light interface and thus control the flow of customers and visitors. At the same time, new sensors can be taught-in via an administration area and the entry traffic light can be configured for the individual entry and exit situation on site, e.g. number of permitted customers/visitors, counting direction of each sensor, etc.

Corona Ampel

#3 Motion Sensor Technology

The passage sensors used reliably detect the number and direction of movement of persons up to a distance of 4 m. With a centrally positioned digital entrance control and one sensor on each side, an entrance area with a width of up to 8 metres can be monitored. However, we recommend that the entrance or exit area be restricted to a maximum of 2 metres by barriers. An almost 100% accurate count of the number of people is only possible if it can be ensured that no more than one person passes the sensor at a time or stays in the detection range of the sensor.

#4 Simple disinfection

The device can be cleaned of light soiling with conventional cleaning agents. Heavy soiling can be removed with isopropanol.

#5 Full service before and after installation

Our support is available at any time and will assist you with questions regarding commissioning. Simply click on our service form.

#6 Complex application scenarios possible

If there are several entrances, the main entrance can be prioritized when counting customers. All we need is precise information about entrances and exits, and the range of the devices. Read more about how our Corona entrance control work in the news article “How to use our Corona entrance control properly”.

 

#3 Motion Sensor Technology

The passage sensors used reliably detect the number and direction of movement of persons up to a distance of 4 m. With a centrally positioned digital entrance control and one sensor on each side, an entrance area with a width of up to 8 metres can be monitored. However, we recommend that the entrance or exit area be restricted to a maximum of 2 metres by barriers. An almost 100% accurate count of the number of people is only possible if it can be ensured that no more than one person passes the sensor at a time or stays in the detection range of the sensor.

#4 Simple disinfection

The device can be cleaned of light soiling with conventional cleaning agents. Heavy soiling can be removed with isopropanol.

#5 Full service before and after installation

Our support is available at any time and will assist you with questions regarding commissioning. Simply click on our service form.

#6 Complex application scenarios possible

If there are several entrances, the main entrance can be prioritized when counting customers. All we need is precise information about entrances and exits, and the range of the devices. Read more about how our Corona entrance control work in the news article “How to use our Corona entrance control properly”.

 

Send us an enquiry now
back to news section

CONSULTING, INDIVIDUAL SOLUTIONS, COMPREHENSIVE SUPPORT

You would like to start your own project or have questions
to our products?

Contact us now